AEG 56740 - Manual (Page 13)

2. Press the TIME button repeatedly until the
desired programme duration is shown in
the display, e.g. 20 for a programme of 20
minutes.
If the programme duration is not selected, the
duration is automatically set to 10 mins.
DELAY START function
With the DELAY START button, you can delay the start of a programme by between
30 minutes (30') and a maximum of 20 hours (20h).
1. Select the programme and additional functions if necessary.
2. Press the DELAY START button as many
times as necessary until the required start
delay appears on the display, e.g. 12h if
the programme is to be started in 12
hours.
If the display is showing 20h and you
press the button again, the time delay will
be cancelled. The display will show 0' and
then the duration of the selected pro-
gramme.
3. To activate the delay timer, press the START PAUSE button. The amount of time re-
maining until the programme is set to start is continuously displayed (e.g. 15h, 14h,
13h, … 30' etc).
The delay time icon is on.
CHILD LOCK function
The child lock can be set to prevent a programme being accidentally started or a programme
in operation being accidentally changed. The child lock function locks all buttons and the
programme knob. The child lock can be activated or deactivated by holding down the
BUZZER and TIME buttons simultaneously for 5 seconds.
– Before programme is started: Appliance cannot be used
– After programme is started: Programme in operation cannot be changed
The icon appears in the display to indicate that the child safety device is activated.
The child safety device is not deactivated once the programme comes to an end.
If you want to set a new programme, you must first deactivate the child safety device.
Daily use 13