Samsung RF24FSEDBSR-AA - Manual (Page 9)

setting up _09
01 SETTING
UP
Setting up your French Door
Refrigerator
GETTING READY TO INSTALL
THE REFRIGERATOR
Congratulations on your purchase of this Samsung
French Door Refrigerator.
We hope you enjoy the state-of-art features and
effi ciencies that this new appliance offers.
Selecting the best location for the
refrigerator
Choose :
• A location with easy access to a water supply.
• A location without direct exposure to sunlight.
• A location with a level floor.
• A location with enough space for the
refrigerator doors to open easily.
• A location that allows sufficient space to the
right, left, back and top for air circulation.
• A location that allows you to move the
refrigerator easily if it needs maintenance or
service.
• Do not install the refrigerator where the
temperature will go below 50 ºF (10 ºC).
• Do not locate the refrigerator where it may
become wet.
If the refrigerator does not have enough space,
the internal cooling system may not work properly.
If your refrigerator has an ice maker, allow extra
space at the back for the water line connections.
When you install the refrigerator next to a fi xed
wall, you need a minimum clearance of 3 ¾”
(95 mm) between the refrigerator and wall to allow
the door to swing open.
Important : Make sure that you can easily move
your refrigerator to its fi nal location by measuring
doorways (both width and height), thresholds,
ceilings, stairways, etc.
The following chart details the exact height and
depth of this Samsung French Door Refrigerator.
A A
B B
C C D D
E E
Model RF24FS**
Depth “A” 28 5/8" (726 mm)
Width “B” 35 6/8" (908 mm)
Height “C” 68 7/8" (1749 mm)
Overall Height “D” 70" (1777 mm)
Depth “E” 31" (788 mm)
60 1/8" 60 1/8"
(1526 mm) (1526 mm)
12 2/8" 12 2/8"
(309 mm) (309 mm)
120° 120° 120° 120°
2" 2"
(50 mm) (50 mm)
35 3/4" (908 mm) 35 3/4" (908 mm)
2
4
"
24"
(6
1
0
m
m
)
(610 mm)
4
2
6
/8
"
(1
0
8
8
m
m
)
42 6/8" (1088 mm)
4 6/8" (122 mm) 4 6/8" (122 mm)
2 3/8" (61 mm) 2 3/8" (61 mm)
4
4
1
/4
"
(1
1
2
5
m
m
)
44 1/4" (1125 mm)
Each measurement based on the design
dimension, so it may differ depending on
the measuring method.
DA68-02897A-07.indb 09 DA68-02897A-07.indb 09 2014. 6. 23. 5:17 2014. 6. 23. 5:17