Tracking auto play, Function (dvd), Special vcr playback features – Samsung DVD-V4700-XAC User Manual

Page 16

ENG-29

ENG-28

Tracking

Auto Play

The Tracking adjustment removes the white lines that

sometimes appear during playback because of slight

differences in recording decks. The TRK button will

automatically align the recorded tracks with the

playback heads to solve this problem. You may also set

tracking manually.

Adjust Tracking Manually
During playback, press the CH/TRK /
buttons to remove white lines from the picture.

If you want your videotapes to play automatically when

you insert them, turn on Auto Play.
NOTE: Only tapes that are missing the Record Safety

Tab will play automatically when inserted.

Open the “MENU”
With the VCR in Stop or Play mode, press the
MENU button.

Select “VCR”
Using the UP/DOWN buttons, move the selection
bar to “VCR” then press ENTER to select.

Select “Tape Length”
Press the RIGHT button to select the Tape Length.
This information is usually printed on the tape box.
The menu cycles through: T-120, T-160 or T-180.
Once the type of cassette is set, the VCR can
display the amount of time remaining on the tape
when you press the INFO. button.

Select “Auto Play”
Move the selection bar to “Auto Play,” then press
right button to select from the following options:
• On - The VCR will automatically begin playing a

video tape when it is inserted, as long as the
safety tab of the cassette has been removed.

• Off - Auto play is disabled.

T-120
T-160
T-180

On
Off

Function (DVD)

Use this feature to check your DVD.

Open “MENU”
With the DVD in Play mode, press the MENU
button.

Select “FUNCTION”
Use the UP/DOWN buttons to highlight
“FUNCTION” then press the ENTER button.

Select “DVD Function”
Using the UP/DOWN buttons to highlight “DVD
Function” then press ENTER to select.

Select “Title Menu”
Highlight “Title Menu”, then press the ENTER
button.

- Disc Menu

Highlight “ Disc Menu”, then press the ENTER
button.

- Information

Highlight “Information”, then press the ENTER
button.

- Zoom

Highlight “Zoom”, then press the ENTER button.

- Bookmark

Highlight “Bookmark”, then press the ENTER
button.

- Repeat

Highlight “Repeat”, then press the ENTER button.

- EZ View

Highlight “EZ View”, then press the ENTER
button.

Title Menu

Disc Menu

Information

Zoom

Bookmark

Repeat

EZ View

DVD Function

Special VCR Playback Features

While a videotape is playing, you can enjoy a variety of

special playback features, including Still, Frame

Advance, Skip, Repeat, and more. Press the Play button

again to resume normal playback.

Pause
In Play mode, press

❿

(PLAY/PAUSE) to still a

single frame.

Frame Advance
In the pause mode, press F.ADV/SKIP to advance
to the next frame.

Fps/Review
In Play mode, press FORWARD (

❿❿

) or

REWIND (

➛➛

) to Cue/Review at two speeds:

• Picture Search — Press and release to advance

the tape forward or backward at 5 times normal
speed.

• Jet Search — Press and hold to advance the tape

forward or backward at 7 times normal speed.

Skip
In Play mode, press F.ADV/SKIP to cue ahead
exactly 30 seconds. Press F.ADV/SKIP repeatedly
up to 4 times to cue ahead 2 minutes.

Repeat
• In Play mode, press Repeat to review the last

5 seconds of tape (SP mode).

• In Play mode, press Repeat to review the last

15 seconds of tape (SLP mode).

Shuttle
In Play mode, Shuttle >> gradually increases
the cue speed: Double Speed playback - Picture
Search - Jet Search. Shuttle << gradually
slows down the tape, then goes into Slow mode,
Still mode, Reverse Picture Search and Reverse
Jet Search.

Press the INFO. button to see the current status of
the VCR deck, as well as the tape counter position
and record speed.