Samsung DVD-R155-XAA - Manual (Page 28)

S
ystem Setup
English - 28
Quick Recording Setting
It takes about 10 seconds for a disc to load (initialize) every time
you turn on the unit. To bypass this initialization process, you can
set the Quick Recording feature to On. This enables you to record
immediately without having to wait for the disc to load.
1. With a disc inserted and the unit in Stop mode, press the MENU button
on the remote control.
2. Select Setup using the ▲▼ buttons, then press the ENTER or ►
button.
You can't use the Setup functions while playing a disc.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button.
System menu will be displayed.
4. Select Quick Recording using the ▲▼ buttons, then press the
ENTER or ► button.
Quick Recording menu will be displayed.
5. Select On using the ▲▼ buttons, then press the ENTER or ► button.
The Quick Recording is set to Off as default.
Anynet+(HDMI-CEC)
Anynet+ is a function that can be used to operate the recorder using
a Samsung TV remote control, by connecting the DVD Recorder to
a SAMSUNG TV using an HDMI Cable. (see page 15) (This is only
available with SAMSUNG TVs that support Anynet+.)
1. With the unit in Stop mode/No Disc mode, press the MENU button on
the remote control.
2. Select Setup using the ▲▼ buttons, then press the ENTER or ► button.
3. Select System using the ▲▼ buttons, then press the ENTER or ►
button. The system menu will be displayed.
4. Select Anynet+(HDMI-CEC) using the ▲▼ buttons, then press the
ENTER or ► button.
Anynet+(HDMI-CEC) items will be displayed.
5. Select On using the ▲▼ buttons, then press the ENTER or ► button.
Using Anynet+(HDMI-CEC)
1. Connect the recorder to a Samsung TV with an HDMI cable.
(See page 15)
2. Set the Anynet+(HDMI-CEC) to “On” on your DVD Recorder. (see above)
3. Set the Anynet+ function on your TV.
(See the TV instruction manual for more information.)
• You can operate the DVD Recorder by using the TV remote control.
(Available TV buttons : , , , , and buttons,
~ button)
• When you press the Anynet+ button on the TV's remote control, the OSD to the
left will appear.
- DVDR Operation : Same as ANYKEY button ( ) on the DVD
Recorder remote control.
- DVDR Menu : Same as MENU button ( ) on the DVD Recorder
remote control.
▌
■
▌
System DVD-Recorder
Title List
Playlist
Disc Manager
Timer Rec.
Setup
DVD-RW(VR)
CM Skip Time : 15 Sec ►
EP Mode Time : 6 Hours ►
Chapter Creator : Off ►
Quick Recording : Off ►
Anynet+(HDMI-CEC) : On ►
MOVE ENTER RETURN EXIT
System DVD-Recorder
No Disc
Timer Rec.
Setup
CM Skip Time : 15 Sec ►
EP Mode Time : 6 Hours ►
Chapter Creator : Off ►
Quick Recording : Off ►
Anynet+(HDMI-CEC) On ► Off
On
MOVE ENTER RETURN EXIT
TV Menu
View TV
DVDR Menu
DVDR Operation
Receiver : Off
Setup
DVDR
Move Enter Exit
01317A-01-R155-XAA-ENG.indb 28 01317A-01-R155-XAA-ENG.indb 28 2007-01-25 오후 4:33:22 2007-01-25 오후 4:33:22