Starting the multi slide show ( ), Start the multi slide show, Selecting images – Samsung EC-BL103RBC-US User Manual

Page 64

Starting the Multi Slide Show ( )

Images can be displayed continuously at pre-set intervals.
You can view the Multi Slide Show by connecting the camera to an
external monitor.
1. Press the play mode button and press the menu button.
2. Press the LEFT / RIGHT button and select the [MULTI SLIDE SHOW]

menu tab.

Start the Multi Slide Show

The Multi Slide Show can start only in the [Show Start] menu.
1. Use the Up / Down buttons to select the [Show Start] menu and

press the Right button.

2. Select a desired sub menu by pressing

the Up / Down button.

[Play]

: The Multi Slide Show is

closed after one cycle.

[Repeat Play] : The Slide show is

repeated until cancelled.

3. Press the OK button and the slideshow will be started.

- To pause the slide shown while playing it back, press the play

& pause( Ø ) button again.

- Pressing the play & pause( Ø ) button again will cause the

Multi Slide Show restart.

- To stop playback of the Multi Slide Show, press the play &

pause ( Ø ) button, and then press the OK / Menu button.

MULTI SLIDE SHOW

Interval

Images

Repeat Play

Play

Show Start

Effect

Music

Back

Set

You can select image to view

1. Use the Up / Down buttons to select the

[Images] menu and press the Right button.

2. Select a desired sub menu by pressing

the Up / Down button.

[All]

: All images saved in the

Memory are played back.

[Date] : Images taken in a specified

date are played back.

[Select] : Play only the selected images. If you press the Right

button, you can select the desired images to play
back. The selected image can be saved as [Select1],
[Select2] and [Select3]. If you save the selected image
with the [New Select] command, it will be saved as
[Select1]. But when a new image is saved again using
[New Select], the former image which had been saved
as [Select1] will be saved as [Select2] automatically.
You can change and cancel the images which were
saved as [Select1], [Select2] and [Select3].

3. Press the OK button and the settings are saved.
4. Select [Play] or [Repeat Play] in the [Show] menu to start the

multi slide show.

Selecting Images