Samsung SEK-1000-ZA User Manual
Page 82
74
75
●
HDMI Black Level
This is available only for video input via an HDMI cable. Use this to reduce image retention that
may occur when watching video from an external device. Choose one of the black levels.
Try Now
●
Film Mode
Optimizes the picture quality for movies. Select the mode for watching movies. This feature is
only available when watching TV or when the input signal is AV, Component (480i, 1080i), or
HDMI (1080i). The
Cinema Smooth
option is only active when the TV inputs an HDMI 24Hz signal.
The
Cinema Smooth
option is only available for PDP 8500 series.
Try Now
●
Auto Motion Plus
Use this to reduce blur and judder from scenes with rapid movement. If you select
Custom
, you
can configure the afterimage and screen trembling removal ratio and you can view a sharper
image through the
LED Clear Motion
function. This feature is only available for LED TVs.
"
While
Auto Motion Plus
is running, select the virtual remote panel's
INFO
button to display the
resolution and frequency of the incoming video signal (60Hz). The displayed frequency is not the same
as the frequency of the picture the TV is displaying when Auto Motion Plus is activated.
●
Analog Clean View
Reduce diagonal noise in picture cause by the crosstalk of signals.
"
This option is only available for analog broadcasts.
●
Smart LED
This controls the brightness of individual areas on screen to maximum contrast automatically.
This function is not supported depending on the region or model. This feature is only available
for LED 9000 series.
●
Cinema Black
In Movie mode, this feature dims the top and bottom areas of the video image to provide a more
immersive viewing experience. This feature is only available for LED 9000 series.