Samsung HLS4676SX-XAA - Manual (Page 131)

English - 131
• For replacement, you will need a 5.91-Inch screwdriver and a pair of gloves.
1 Unplug the TV, then use a
screwdriver to remove the
screws.
2 Remove the Lamp cover.
3 Push the clip and pull down
the Lamp holder.
4 Separate the Lamp from the
engine by holding the handle
and pulling it out.
NOTES
• Be sure the replacement Lamp is the same type.
• After replacing the lamp, align the lamp cover with the groove and secure the screws.
• The TV will not turn on if the lamp cover is not correctly closed (as this will activate the protective
circuit).
BP68-00617A-00Eng(130~135) 8/11/06 4:26 PM Page 131