Samsung DVD-R120-XAX - Manual (Page 29)

English - 29
2. Clock Set
This menu is used to set the current time. You need to
set the time to use timer recording.
1 With the unit in Stop mode/No Disc mode,
press the MENU button.
2 Select Setup using the …† buttons, then
press the ENTER or √ button.
3 Select System using the …† buttons, then
press the ENTER or √ button.
System menu will be displayed.
RETURN SELECT MOVE EXIT
Timer Record No Disc
Timer Record √ √
Scheduled Record List √ √
Timer Rec.
Setup
RETURN SELECT MOVE EXIT
Setup No Disc
System √ √
Language √ √
Audio √ √
Video √ √
Parental Control √ √
Auto Clock Set
C
onnecting & Setting UP
4 Select Clock Set using the …† buttons, then
press the ENTER or √ button.
Clock Set menu will be displayed.
If you have the Antenna connected via Method 1 or 3
on pages 15-17.
The DVD Recorder automatically sets the clock by
searching for a channel that carries a time signal and
sets your time zone and daylight saving(if applicable).
5 Select Auto Clock Set using the …† buttons,
then press the ENTER or √ button.
6 Press the ENTER or √ button.
Select On using the …† buttons, then press
the ENTER or √ button.
RETURN SELECT MOVE EXIT
System No Disc
Clock Set √ √
Channel Set √ √
CM Skip Time : 15 Sec √ √
EP Mode Time : 6Hours √ √
Chapter Creator : Off √ √
RETURN SELECT MOVE EXIT
Clock Set No Disc
Auto Clock Set √ √
Manual Clock Set √ √
Method 1 and 3
You must have the antenna connected to set the
Auto Clock. See pages 15~17 for Antenna
connections(Method 1, 2 and 3).
RETURN SELECT MOVE EXIT
Auto Clock Set No Disc
Auto Clock Set : On √ √
Clock Data CH : Automatic √ √
Time Zone : Automatic √ √
Daylight Saving : Automatic √ √
Off
On
Timer Rec.
Setup
Timer Rec.
Setup
Timer Rec.
Setup
Timer Rec.
Setup
■ The Menus are slightly different
depending on whether a disc is inserted or
not. The menus described on the next few
pages are with no disc in the unit.
NOTE
AK68-00683A-0v(14~35) 2005.9.28 5:31 AM Page 29