Samsung PN50A510P3FXZA - Manual (Page 8)

English - 8
4
When selecting the Cable TV system:
Press the ENTER button to start the auto program.
Press the ▲, ▼, ◄, ► to select the correct analog
signal cable system source among STD, HRC, and
IRC, then press the ENTER button. If you have
Digital cable TV, select the cable system signal
source for both Analog and Digital.
➢ STD, HRC, and IRC identify various types of
cable TV systems. Contact your local cable
company to identify the type of cable system
that exists in your particular area. At this point
the signal source has been selected.
5 The TV begins memorizing all available stations.
If you want to stop Auto Programming, press the
ENTER button.
The Stop Auto Program? message will be
displayed. Select Yes by pressing the ◄ or ►
button, then press the ENTER button.
1 Press the MENU button to display the menu.
Press the ENTER button to select Picture.
2 Press the ENTER button to select Mode.
Press the ▲ or ▼ button to select Dynamic,
Standard, or Movie, then press the ENTER button.
Picture Mode
•
Dynamic: Select the picture for high-definition in a
bright room.
• Standard: Select the picture for the optimum display
in the normal environment.
• Movie: Select the picture for viewing movies in a
dark room.
Picture Control
Changing the Picture Standard
You can select the type of picture which best corresponds to your
viewing requirements.
1 To select the desired picture mode, follow the
“Changing the Picture Standard” instructions number 1
to 2.
2 Press the ▲ or ▼ button to select Cell Light,
Contrast, Brightness, Sharpness, Color, or Tint
(G/R), then press the ENTER button.
3 Press the ◄ or ► button to decrease or increase the
value of a particular item. Press the ENTER button.
Press the EXIT button to exit.
➢ • When you make changes to Cell Light,
Contrast, Brightness, Sharpness, Color, or
Tint (G/R) the OSD will be adjusted accordingly.
• When in PC mode, Tint(G/R), Sharpness and
Color are not available.
• Each adjusted setting will be stored separately
according to its input mode.
• Cell Light: Selects the brightness of PDP Cell Light.
• Contrast: Adjusts the contrast level of the picture.
• Brightness: Adjusts the brightness level of the
picture.
• Sharpness: Adjusts the edge definition of the
picture.
• Color: Adjusts color saturation of the picture.
• Tint(G/R): Adjusts the color tint of the picture by
compensating the red and green color
Customizing the Picture Settings
Auto Program
Auto Program in Progress.
Stop
Cable 3
3%
DTV Air : 5 Air : 4
DTV Cable : -- Cable : --
Enter Return
Auto Program
Select the cable system.
Analog
Digital
HRC IRC
HRC IRC STD
Start
Return Enter Move
STD
Picture
Mode :
Cell Light : 7
Contrast : 80
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
Dynamic
Standard
Movie
7 Cell Light
Return Enter Adjust Move
BN68-01363L-00Eng.indd 8 2008-04-04 오후 2:06:12