Samsung PN50A510P3FXZA - Manual (Page 7)

English - 7
Press the POWER button on the remote control.
You can also use the POWER button on the TV.
➢ It may take a while when your TV starts.
Turning the TV On and Off
Viewing the Menus and Displays
Viewing the Display
1 Press the INFO button on the remote control.
The TV will display the channel, the type of sound,
and the status of certain picture and sound settings.
Viewing the Menus
The display identifies the current channel and the status of
certain audio-video settings.
1 With the power on, press the MENU button.
The main menu appears on the screen. The menu’s
left side has icons:
Picture, Sound, Channel, Setup, Input,
Application.
2 Press the ▲ or ▼ button to select one of the icons.
Then press the ENTER button to access the icon’s
sub-menu.
3 Press the EXIT button to exit.
➢ It takes about one minute until the on-screen
menu disappears.
Memorizing the Channels
Selecting the Video Signal-source
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV(i.e., an air or a cable system).
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
2 Press the ENTER button to select Antenna.
Press the ▲ or ▼ button to select Air or Cable,
then press the ENTER button. Press the EXIT
button to exit.
Storing Channels in Memory (Automatic Method)
1 Press the MENU button to display the menu.
Press the ▲ or ▼ button to select Channel, then
press the ENTER button.
2 Press the ▲ or ▼ button to select Auto Program,
then press the ENTER button.
3 Press the button to select an antenna connection,
then press the ENTER button.
➢ Air: Air antenna signal.
Cable: Cable antenna signal.
Auto: Air and Cable antenna signals.
TV #1 Sun, Sep 3 1:45 pm
M. Spillane’s Mike Hammer
Bonocrunch
DTV Air
3-
Dolby Digital
480i 4:3 English
12:59 pm - 1:59 pm
SRS
Mode : Standard
Cell Light : 7
Contrast : 95
Brightness : 45
Sharpness : 50
Color : 50
Tint (G/R) : G50/R50
Detailed Settings
Picture
SRS
Antenna : Air
Auto Program
Channel List
Clear Scrambled Channel
Fine Tune
Signal Strength
Air
Cable
Channel
Channel
Antenna : Air
Auto Program ►
Channel List
Clear Scrambled Channel
Fine Tune
Signal Strength
Auto Program
Select the Antenna source to memorize.
Air
Cable
Auto
Return Enter Move
Start
Start
Start
Continued...
BN68-01363L-00Eng.indd 7 2008-04-04 오후 2:06:11