Avenview SW-HDM3D-C5-4X4 - Manual (Page 13)

www.avenview.com 13
1.9 Operation and IR Control
1.9.1 Source Side
1.9.2 Method A: Push-in Button
1. Push the buttons in the selected range of red.
2. Choose the desired output from the left vertical four buttons from OUT 1 to OUT 4, and then press the
horizontal buttons from 1-4 to make your desired HDMI source selection. For example, choose OUT 1 to set
OUTPUT1 with SOURCE1; choose OUT2 to set OUTPUT2 with SOURCE1.
1.9.3 Method B: IR Remote Control
Press “2” to set
output1 with source2.