Samsung SPK4215MX-XAC - Manual (Page 17)

7 Insert the fixing bolts into the boltholes on both sides (left and right) of the wall
fixing panel. Keep the fixing bolts tight to prevent the display from separating
from the panel, and falling to the floor.
Remove the fixing bolts from both sides (left and right) of the wall attachment panel. Lift and pull the
bottom of the display a small amount, to separate the insulation rubber point from the bottom of the
wall attachment panel.
Lift the display and separate the insulation rubber point from the groove on top of the wall attachment
panel.
17
Separating the Display from the Wall Attachment Panel:
´
Œ
AA68-01689A-1 4/12/05 10:46 AM Page 17