Samsung RFG293HABP-XAA - Manual (Page 13)

01
s
E
ttin
G
u
P
5. Position the top table ( 9 ) in place. Insert the 3
screws into the top table, and tighten with a philips
screw driver (+). Open the door, reinsert the cap top
table (
10 ) and close the doors.
REAttACHinG tHE REFRiGERAtoR DooRs
4. Connect the connector ( 7 ) on the left side door and
two connectors ( 8 ) on the both side of doors.
When reattaching the top table, make sure that the
wires are not pressed or damaged by the hinge cover.
After assembling, close the door and check to see
whether the door has gaps between gaskets or is
tilted. If they are, please refer to “Adjusting the level” on
page 15.
10
9
8
7
8
Setting Up _13
DA68-01926B.indb 13 2010.5.11 11:33:14 AM