Setting up the audio options – Samsung DVD-L1200-XAA User Manual

Page 53

ENGLISH

1. With the unit in Stop mode, press the MENU button.
2. Select Setup using UP/DOWN buttons, then RIGHT or ENTER button.
3. Select Audio Setup using UP/DOWN buttons, then press the RIGHT or ENTER button.
4. Use the UP/DOWN buttons to select the desired item. Then press the RIGHT or ENTER button.

Digital Output
1. PCM : Converts to PCM(2CH) audio. Select PCM when using the Analog Audio Outputs.
2. Bitstream : Converts to Dolby Digital Bitstream (5.1CH).

Select Bitstream when using the Digital Audio Output.

NOTE:

NOTE: Be sure to select the correct Digital Output or no audio will be heard.

DTS
1. Off : Doesn’t output digital signal.
2. On : Outputs DTS Bitstream via digital output only.

Select DTS when connecting to a DTS Decoder.

Dynamic Compression
1. On : To select dynamic compression.
2. Off : To select the standard range.

NOTE:

• How to make the Setup menu disappear or return to menu screen during set up;

Press RETURN or LEFT button.

• Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

• “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Setting Up the Audio Options