Samsung EC-WB700ZBPBCA - Manual (Page 115)

Wireless network
114
Connecting to a WLAN and configuring network settings
Learn to connect via an access point (AP) when you are in a range of a WLAN. You can also configure network settings.
Icon Description
Ad hoc AP
Secured AP
WPS AP
Signal strength
Press [t] or touch to open AP setting options
•
When you select a secured AP, a pop-up window appears. Enter the required
passwords to connect to the WLAN. For information about entering text, refer
to "Entering text". (p. 117)
• When a login page appears, refer to "Using the login browser". (p. 115)
•
When you select an unsecured AP, the camera will connect to the WLAN.
•
If you select a WPS profile supported AP, select “ WPS PIN connection,
and then enter a PIN on the AP device. You can also connect to a WPS profile
supported AP by selecting “ WPS button connection on the camera, and
then pushing the WPS button on the AP device.
Connecting to a WLAN
1
Rotate the mode dial to w.
2
Select , , , or .
3
Press [m], and then select Wi-Fi Setting.
•
In some modes, follow the on-screen instructions until the Wi-Fi Setting
screen appears.
•
The camera automatically searches for available AP devices.
4
Select an AP.
Refresh
Back
•
Select Refresh to refresh connectable APs.
•
Select Add wireless network to add an AP manually. Your AP name must be
in English to add the AP manually.