Samsung RF197ABRS-XAA - Manual (Page 9)

setting up _9
01
SETTING UP
Setting up your French Door Refrigerator
First thing! Make sure that you can easily move your Refrigerator to its final location by measuring doorways
(both width and height), thresholds, ceilings, stairways, etc.
The following chart details the exact height and depth of Samsung French Door Refrigerator.
FLOORING
For proper installation, this refrigerator must be placed on a
level surface of hard material that is the same height as the
rest of the flooring. This surface should be strong enough to
support a fully loaded refrigerator, or approximately 106kg.
To protect the finish of the flooring, cut a large section of the
cardboard carton and place under the refrigerator where you
are working. When moving the refrigerator, be sure to pull it
straight out and return it to position by pushing it straight in.
• The measurements here are based on the design dimension,which may differ depending on the
measuring method.
When moving your refrigerator
To prevent floor damage, be sure the front adjusting legs
are in the up position(above the floor).
Refer to ‘Adjusting the doors’ (on page 15).
CAUTION
Model RF197** RF217**
Dimen-
sion
(inch/mm)
Width (A) 32 1/8(817)
Depth
without door (B) 24 1/4(617) 26 1/4(667)
with door (C) 30 4/8(775) 32 4/8(825)
Height
without hinge (D) 69 7/8(1775) 69 7/8(1775)
with hinge (E) 70 1/8(1780) 70 1/8(1780)
Congratulations on your purchase of this Samsung French Door Refrigerator. We hope you enjoy the state-of-art
features and efficiencies that this new appliance offers.
Selecting the best location for the Refrigerator
• A location with easy access to the water supply.
• A location without direct exposure to sunlight.
• A location with level (or nearly level) flooring.
• A location with enough space for the Refrigerator doors to open easily.
• Allow sufficient space to the right, left, back and top for air circulation.
• Please ensure that appliance can be moved freely in the event of maintenance & service.
• If you install the Refrigerator where is below 10ºC, it may not function optimally.
• Do not locate the refrigerator where the wet condition.
B
C
D
A
E
GETTING READY TO INSTALL THE REFRIGERATOR
Flat-blade
screwdriver(-)
Control Lever
1492mm
RF197* : 1172mm RF217* : 1222mm
90°
90°
817mm
35mm
100mm
RF197* : 617mm RF217* : 667mm
337.5mm
135°
135° RF197* : 1172mm RF217* : 1222mm
（100mm）