Samsung DV457EVGSWR-AA - Manual (Page 3)

3
TEST MODE
Service Mode
* If "AE3" or "AE4" error occured, press the Start button then error will be cleared.
How to enter:
DV455*
- To enter Service Mode , press Wrinkle Prevent + Temp. Keys 3 seconds in normal mode until it sends
out a beeping sound.
- If pressing Wrinkle Prevent + Temp. Keys in Service mode , it will return Normal mode.
- Even though entering Service mode, the operating cycle will not be influenced.
DV457*
- Method 1 : Select Title Option “1” on Course Selction Mode.  Press Extras for 3 Seconds.
- Method 2 : Tap “2” three times  Tap “3” two times  Tap “2” once On the Progerss Mode.
Touch Sensor Data Display Mode
Definition of Touch Sensor Data Display Mode:
- This mode is default mode of entering service mode.
How to enter:
DV455*
- Once the unit enters service mode, the mode changes to touch sensor display mode.
- This action will put the dryer into sensor bar touch data mode
- Dryer will display Sensor Bar data.
DV457*
- If the “6” button is pressed in service mode, the mode changes to touch sensor data display mode.
ALIGNMENT AND ADJUSTMENTS
WARNING
To avoid risk of electrical shock, personal injury or death; disconnect power to dryer before
servicing, unless testing requires power.

 
Technical_information-02835D-02_EN.indd 3 2012-04-26 �� 11:51:29