Nilfisk-ALTO CLE2.0 - Manual (Page 16)

15
AUDIO INPUT
AUDIO OUTPUT
SC INPUT
SC OUTPUT
EXPANDER/GATE
SECTION
Interactive Compressor
6. TECHNICAL SPECIFICATIONS
Type
Impedance
Maximum input level
Type
Impedance
Maximum output level
Bandwidth
THD +N%
IMD
Noise
Crosstalk
Type
Impedance
Maximum input level
Type
Impedance
Maximum output level
Type
Threshold
Ratio
Type
Threshold
Ratio
Manual Attack Time
Manual Release Time
Auto Attack Time
Auto Release Time
Output
Type
Threshold
Ratio
Stage 1:
Attack and Release
Stage 2
Attack
Release
OPERATING LEVEL
BYPASS
CONTOUR
SMART
I/O METER
AUTO
SC EXTERNAL
SC MONITOR
COUPLE
Operating Level
CMRR
Active balanced XLR and 1/4"JACK
Balanced: 50K Ohm
Unbalanced: 25K Ohm
alanced and nbalanced: B U +21 dBu
+21 dBu
XLR and 1/4" JACK
Balanced: 60 Ohm
Unbalanced: 30Ohm
20Hz to 20KHz at +0,-0.5dB
0.01% typ.1KHz, @+4dBu
0.04% typ,1KHz, @+20dBu
0.01% typ
>-90dBu
<-100dB
1/4"JACK
>10K Ohm
+24dBu
1/4"JACK
2K Ohm
+21dBu
Interactive Expander
Variable: from OFF to +15dB
Variable: from 1:1.2 to 1:8
Variable: from -40dB to +20dB
Variable: from 1:1 to
:1
Variable: from 1ms to 100ms/20dB
Variable: from 0.05ms to 5s/20dB
Typ. 15ms at 10dB; 5ms at 20 dB; 3ms at 30dB
Typ. 125dB/s
Interactive Peak Limiter
Smart Gain Control peak limiter
Variable: from +4dB to OFF
:1
Clipper
zero
Program Limiter
typ. <5ms
typ. 20dB/s
Internal reference level: from +4dBu to -10dBV
Bypass switch
Allows for frequency dependent detection
Enables the ` Smart Knee Control `
characteristics
Switches input and output for the level meter
Enables the program dependent setting of
the ATTACK and RELEASE times
Switches the detector section to the external
SC input
Monitoring the external SC input, disengaging
the normal audio
Linking CH1 ( master ) and CH2; stereo operation
+4dBu /-10dBv
>55dB @1KHz
COMPRESSOR
SECTION
PEAK LIMITER
SECTION
FUNCTION
SWITCHES