Nilfisk-ALTO CLE2.0 - Manual (Page 15)

Send
Return
Tip
Ring
Sleeve
14
1/4" TRS insert
Insert Leads
5.3 Rack ounting M
The most secure mounting is on a universal rack shelf available from various rack manufactures or your music
dealer. The CLE 2.0 Compressor /Limiter /Gate fits into one standard 19" rack unit of space.
Please allow at least an additional 4" depth for the connectors on the rear panel. Be sure that there is enough
air space around the unit for sufficient ventilation and please do not place the CLE 2.0 Compressor /Limiter /Gate
on high temperature devices such as power amplifiers etc. to avoid overheating.
c. Insert Points Connection
In case you are using the main inserts of your mixing console and you have a single jack for SEND and
RETURN, you can use an insert Y cable. Please see following drawing.
21
3
1
2
3
TIP RING SLEEVE
TIP RING SLEEVE
SLEEVE TIP
SLEEVE RING TIP