Samsung DVD-R120-XAC - Manual (Page 2)

Antenna + Set-Top Box or VCR + DVD Recorder + TV : No Cable Box
Connect the signal source to the STB or VCR
Use a TV antenna or coaxial cable to connect the signal source
coming from the antenna or wall to the ANT IN jack on the STB
or VCR.
Connect the STB or VCR to the DVD Recorder
Use the Video/Audio Cable to connect the LINE OUT jacks on the
STB or VCR to the AUDIO/VIDEO LINE 1 IN jacks on the DVD
Recorder.
● For better picture quality, if your STB or VCR has an S-Video
jack, you can use S-Video cable instead of the yellow video
jack on the Video/Audio cable.
Connect the DVD Recorder to the TV
Use the Video/Audio Cable to connect the LINE AUDIO
OUT(R/L)/VIDEO OUT jacks on the DVD Recorder to the Audio &
Video jacks on the TV.
● For better picture quality, if your TV has an S-Video jack, you
can use S-Video cable instead of the yellow video connector
on the Video/ Audio cable.
● For the best picture quality, if your TV has Component video
jacks, you can use Component cables instead of the yellow
video connector on the Video/Audio cable. If the TV
connected supports Progressive Scan, press the P.SCAN
button on the front of the DVD Recorder to enjoy higher
quality video.
If you have an AV amplifier
Connect either audio cables from the LINE AUDIO OUT jacks on
the DVD Recorder to the LINE IN jacks on your AV amplifier, or a
digital cable from the DIGITAL AUDIO OUT (COAXIAL or
OPTICAL) jack on the DVD Recorder to the DIGITAL AUDIO IN
jack on your AV amplifier.
Antenna + Cable Box + DVD Recorder + TV
Connect the signal source to the Cable Box
Use a coaxial cable to connect the signal source coming from
the wall to the ANT IN jack on your Cable Box.
Connect your Cable Box to the DVD
Recorder
Use a coaxial cable to connect the RF OUT jack on your Cable
Box to the ANT IN jack on your DVD Recorder.
Connect the DVD Recorder to the TV
Use the supplied RF cable to connect ANT OUT on the DVD
Recorder to the ANT jack on the TV. Then use the Video/ Audio
Cable to connect the LINE AUDIO OUT(R/L)/VIDEO OUT jacks on
the DVD Recorder to the Audio & Video jacks on the TV.
● For better picture quality, if your TV has an S-Video jack, you
can use S-Video cable instead of the yellow video connector
on the Video/Audio cable.
● For the best picture quality, if your TV has Component video
jacks, you can use component cables instead of the yellow
video connector on the Video/Audio cable. If the TV
connected supports Progressive Scan, press the P.SCAN
button on the front of the DVD Recorder to enjoy higher
quality video.
If you have an AV amplifier
Connect either audio cables from the LINE AUDIO OUT jacks on
the DVD Recorder to the LINE IN jacks on your AV amplifier, or a
digital cable from the DIGITAL AUDIO OUT (COAXIAL or
OPTICAL) jack on the DVD Recorder to the DIGITAL AUDIO IN
jack on your AV amplifier.
2
… … AV amplifier (receiver) … … STB(VCR)
… … DVD Recorder
œ œ TV
OR
OR OR
… … AV amplifier (receiver)
Cable box
… … DVD Recorder
œ œ TV
OR
OR OR
00684A_quick guide_DVD 2/17/05 9:57 AM Page 2