Samsung EC-WB2200BPBUS - Manual (Page 143)

Camera maintenance
Appendixes 142
Upgrading Firmware
i-Launcher allows you to upgrade the firmware of your camera.
1
Rotate the mode dial to .
2
Select Connectivity → i-Launcher → On.
3
Turn off the camera.
4
Connect the camera to your computer with the USB cable.
You must plug the small end of the USB cable into your camera. If the cable is
reversed, it may damage your files. The manufacturer is not responsible for any
loss of data.
5 Turn on the camera.
6
Install i-Launcher on the PC.
OS How to install
Windows
When the pop-up window prompting you to install i-Launcher
appears, select Yes.
• If a pop-up window prompting you to run iLinker.exe
appears, run it first.
• If the pop-up window prompting does not appear,
click My Computer → i-Launcher → iLinker.exe.
• When you connect the camera to a computer with i-Launcher
installed, the program will launch automatically.
Mac Click Devices → i-Launcher → Mac → iLinker.
7
Upgrade the firmware to the latest version following the on-screen
instructions.
• Select Firmware Upgrader on the screen of i-Launcher.
• Before upgrading the firmware, ensure that the PC is connected to a network.
• Do not turn the camera off until the firmware upgrading is finished.