Samsung BD-E5900-ZA - Manual (Page 16)

Connections
Connecting to a Network Router
You can connect your player to your network
router using one of the methods illustrated below.
To use the AllShare network functionality, you
must connect your PC to your network as shown
in the illustrations.
The connection can be wired or wireless.
Wired Network
|NOTE |
\
Internet access to Samsung's software update server
may not be allowed, depending on the router you use or
your ISP's policy. For more information, contact your ISP
(Internet Service Provider).
\ DSL users, please use a router to make a network
connection.
Wireless Network
|NOTE |
\ If your wireless router supports DHCP, this player can use
a DHCP or static IP address to connect to the wireless
network.
\ Set your wireless router to Infrastructure mode. Ad-hoc
mode is not supported.
\ The player supports only the following wireless security
key protocols:
- WEP (OPEN/SHARED), WPA-PSK (TKIP/AES),
WPA2-PSK (TKIP/AES)
\
Select a channel on the wireless router that is not
currently being used. If the channel set for the wireless
router is currently being used by another device nearby, it
will result in interference and communication failure.
\
If you select the Pure High-throughput (Greenfield)
802.11n mode and set the Encryption type on your router
or router to WEP, TKIP or TKIP-AES (WPS2Mixed), the
player will not support a connection in compliance with
new Wi-Fi certification specifications.
\ Wireless LAN, by its nature, may cause interference,
depending on the operating conditions (router
performance, distance, obstacles, interference by other
radio devices, etc).
Broadband
service
Broadband
service
Broadband modem
(with integrated router)
Broadband
modem
Router
Or
Broadband
service
Wireless Router
|
16
English