beautypg.com

Alignment and adjustments, Service mode, Quick spin test mode – Samsung WA48H7400AW-A2 User Manual

Page 7: Warning

background image

ALIGNMENT AND ADJUSTMENTS

7

Service Mode

Service Mode:
1.
The washer must be on to go into the Service Mode.
2. The motor speed will be displayed when started (It displays 0 when the motor does not spin).
3. The present state of the machine will not be changed.

(i.e., the current cycle in progress will not be interrupted and only the display will change)

4. To exit Service Mode, press Delay End and Pre Soak Key for 3 second again, or Power Key.If

no key is operated during Service Mode for 5 minutes, the machine will return to normal user
mode.

Quick Spin Test Mode

Definition of Quick Spin Test Mode:
- Quick Spin Test Mode is to do Spin Check. (High RPM)
How to Enter:
- During Service Mode, press the Delay End and Self Clean Key for 3 seconds to enter Quick Spin

Test Mode.

- Cannot enter once the washing cycle has started.
Quick Spin Test Mode:
As it enters into the Quick Spin Test Mode, it starts spinning and reaches its maximum RPM.
Once the Spin speed reaches the maximum RPM, the speed drops immediately.
To hold Quick Spin Test Mode (entering Hold Speed Mode), press the Start/Pause button. If the

Start/Pause button is pressed during Quick Spin Test Mode, it will stop accelerating and hold its

spinning speed for 10 minutes before going back to Quick Spin Test Mode.
Also, to cancel the hold and allow Quick Spin Test Mode to continue, press the Delay End and Self
Clean Key together for 3 seconds.
If you hold down the Delay End and Self Clean key for three (3) seconds when the washing

machine is not in Hold Speed Mode, Quick Spin Mode is exited and Service Mode is restored.

To avoid risk of electrical shock, personal injury or death; disconnect power to washer

before servicing, unless testing requires power.

WARNING

Delay End + Pre Soak

Delay End + Self Clean

While it is not in Hold Speed Mode

Delay End + Self Clean

3 sec

While a cycle is not running

Delay End + Self Clean

for 3 sec or after 10 minutes

WA7000HA WASH_WA48H_TECH MANUAL_DC68-03132G-01_EN.indd 7

2014-1-6 15:56:28

This manual is related to the following products: