Samsung DVD-R120-AFS - Manual (Page 20)

After all connections are complete, plug the power cord
in the wall outlet.
“Auto” appears in the panel display. This means
that the current time is being set automatically
(Auto Program) through the antenna under
connection and also the channel is being set.
The setup may take a few minutes.
When the DVD Recorder operates normally, the current
time is automatically set and displayed in the front
panel display.
Method 2 : Connecting a Camcorder
to the LINE 2 IN jacks
You can also use the LINE 2 IN jacks on the front panel
of the DVD Recorder. You can record from connected
equipment, such as a camcorder.
When an input source is inserted into LINE 2 while
viewing TV, the input will be switched to LINE 2
automatically.
Method 3 : Connecting a Camcorder
to the DV IN jack
If your camcorder has a DV output jack, connect it to
the DV input jack of your DVD Recorder.
Step 6 : Connecting the Power
Cord
20 - English
■ After the current time is set automatically,
the recorder will perform Auto Channel
Memory for about 3 minutes. If power is
on, while Auto Channel Memory is in
process, Auto Channel Memory will stop.
In this case, do Auto Channel Memory
from MENU(see page 25).
NOTE
■ If the input is not selected automatically,
use INPUT button to select proper input.
NOTE
2_AK68-00683A-0314~29) 2/17/05 10:11 AM Page 20