Asus TS300-PA4 - Manual (Page 139)

ASUS TS300-E3/PA4 & PS4 6-11
6.2.2 Creating a RAID 10 set
You can create a RAID 10 set using four identical hard disk drives.
To create a RAID 10 set using the Easy Configuration option:
1. From the utility main menu, highlight Configure, then press .
2. Use the arrow keys to select Easy Configuration, then press .
3. The ARRAY SELECTION MENU displays the available drives connected
to the SATA ports. Select the drive(s) you want to include in the RAID set,
then press . When selected, the drive indicator changes from
READY to ONLIN A[X]-[Y], where X is the array number, and Y is the drive
number.
The information of the selected hard disk drive displays at the bottom of the
screen.