Samsung YP-T6HB-XAA - Manual (Page 26)

51
Time Settings Record Settings
50
Š Bitrate
● Use , to set the encoding bit rate.
● When encoding music into an MP3 file, you can select
one of the following bit rates: 32Kbps, 48Kbps, 64Kbps,
96Kbps and 128Kbps.
Š AutoSync
● Use , to set the AutoSync Time from 1 to 5 seconds.
● AutoSync Time is a function for separating and saving
MP3 files when there is no sound for a set time during
MP3 encoding.
● In SYNC 1 setting, encoding stops and it moves to Music Mode when
there is no sound for over 1 second during encoding.
● If AutoSync Time is set to Off, encoding keeps going even if there is
no sound, and then it is saved as one file.
Š Power Off
Press and hold the "M" button. Select Settings ➔ Time
● Use , to set the Power-Off time from 0 to 30 minutes.
● If no button is pressed after play stops, the player will
automatically turn off after the time you set.
● When set to Off, it will not turn off automatically.
10
Š Auto Sleep
● Use , to set the Sleep time to 15, 30, 60, 90, or 120.
The player will automatically turn off after the time you set.
● When set to Off, it does not turn off automatically.
Š Intro Time
● Use , to set the Intro time to 10, 20, 30, or 60 seconds.
● When you select the Intro function(Press and hold "M" button.
Select Settings ➔ Play mode ➔ Intro), the beginning of all
files will be played back for the seconds you set.
Press and hold the "M" button. Select Settings ➔ Record.