Samsung EV-NX200ZBABUS - Manual (Page 102)

101
Camera settings menu
Learn about the menu items of the Setting 3.
To set Setting 3
options,
In Shooting mode, press [ m] ► e ►
an option.
* Default
Item Description
Sound
• System Volume: Set the sound volume or turn all sound
off entirely. (Off, Low, Medium*, High)
• AF Sound: Set the sound the camera makes in AF mode
on or off. (Off, On*)
• Button Sound: Set the sound the camera makes when
you press buttons on or off. (Off, On*)
Sensor
Cleaning
• Sensor Cleaning: Remove dust from the sensor.
• Start-Up Action: When on, the camera performs sensor
cleaning each time you turn it on. (Off*, On)
As this product uses interchangeable lenses, the sensor
can get dust on it when you change lenses. This can lead
to dust particles appearing in the photos you capture. It
is recommended not to change lenses when you are in a
particularly dusty area. Also, make sure to attach the lens cap
to the lens when not using it.
Video Out
Set the video signal output appropriate for your country when
connecting the camera to an external video device such as a
monitor or TV.
• NTSC*: USA, Canada, Japan, Korea, Taiwan, Mexico
• PAL (Supports only PAL B, D, G, H, or I): Australia, Austria,
Belgium, China, Denmark, Finland, Germany, England,
Italy, Kuwait, Malaysia, New Zealand, Singapore, Spain,
Sweden, Switzerland, Thailand, Norway
* Default
Item Description
Anynet+
(HDMI-
CEC)
When you connect the camera to an HDTV that supports
Anynet+ (HDMI-CEC), you can control the play function of the
camera with the TV remote control.
• Off: You cannot control the play function of camera with the
TV remote control.
• On*: You can control the play function of camera with the
TV remote control.
HDMI
Output
When you connect the camera to an HDTV with an HDMI
cable, you can change the resolution of the image.
• NTSC: Auto*, 1080i, 720p, 480p
• PAL: Auto*, 1080i, 720p, 576p
If the connected HDTV does not support the resolution you
select, the camera sets the resolution one level lower.
Firmware
Update
Display the firmware version of the camera body and lens,
and update the firmware.
• Body Firmware: Display and update the firmware of the
camera body.
• Lens Firmware: Display and update the firmware of the lens.
•
You can download firmware upgrades from
www.samsung.com.
•
You cannot run a firmware upgrade without a fully charged
the battery. Recharge the battery fully before running a
firmware upgrade.
•
If you update the firmware, user settings values will be reset.
(Date, time, language, video out will not change.)
•
Do not turn the camera off while the update is in progress.
Setting 3