Tools and materials, What’s in the box, Parts supplied – Samsung NX58F5300SS-AA User Manual
Page 27: Parts needed, Tools needed, Tools and materials _ 27
tools and materials _27
TOOLS
AND
MA
TERIALS
tools and materials
WHAT’S IN THE BOX
Parts supplied
Surface burners and caps (5)
(Model NX58F5500SS/
NX58F5500SB/NX58F5500SW)
Surface burners and caps (5)
(Model NX58F5300SS)
Surface burner grates (3)
Oven racks (2)
Griddle
(Model NX58F5500SS/
NX58F5500SB/NX58F5500SW)
Oven racks (2)
(Model NX58F5300SS)
Anti-tip bracket kit
• Make sure you have received all of the supplied parts shown above.
• If your range was damaged during shipping or you do not have all of the
supplied parts, contact your local retailer.
Parts needed
Gas line
shut-off
valve
Flexible metal
appliance
connector ½ in (ID)
x 5 ft
Flare union
adapter ¾ in or
½ in (NPT) x ½
in (ID)
Flare union
adapter ½ in
(NPT) x ½ in (ID)
135-degree
elbow
(optional)
Lag bolt
or ½-in
(OD) sleeve
anchor
Tools needed
Flat-blade
screwdriver
Phillips
screwdriver
Open-end or adjustable
wrench
Pipe wrench (2)
Nut driver
Pencil and
ruler
Level
Pipe joint compound
Utility knife
Soapy water
solution
130425_(Install)NX58F5300SS_DG68-00503A_EN.indd 27
2013-04-26 �� 3:04:59