Samsung LTN406WX-XAC - Manual (Page 54)

English-
47
O P E R AT I O N
Changing the STEREO Settings
If you live in an area that has poor reception (due to weak frequency), you may hear
noise and experience poor sound quality during the channel selection. Set the stereo
setting to Off to eliminate the noise. Select Off and set the MTS setting to Mono.
• If the sound quality is poor while you are watching a program broadcast in stereo,
press the MTS button and select “Mono.”
• You cannot use the bilingual function while you are watching a program in mono.
• If you set the stereo setting to Off and change the channel, the setting remains
Mono regardless of the properties of the signals sent from the broadcaster.
• Press the MTS button to switch between Mono and Stereo. (Please note that it
works only when the broadcast is done in stereo.)
2
Press the DOWN
button to select
“MTS Setting”, then
press the ENTER
button.
1
Press the MENU button
to display the menu.
Press the DOWN
button to select
“Sound”, then press the
ENTER
button.
3
Press the
UP/DOWN
button to select
“ON”, then press the
ENTER
button.
venus-04-en 6/3/03 3:08 PM Page 47