Samsung LTN406WX-XAC - Manual (Page 31)

English-
24
3
Press the ENTER
button.
The TV will begin
memorizing all of the
available channels.
O P E R AT I O N
Storing Channels in Memory
(Automatic Method)
The TV automatically cycles
through all of the available
channels and stores them in
memory. This takes about one to
two minutes.
Press ENTER at any time to
interrupt the memorization process
and return to the CHANNEL menu.
2
Press the DOWN
button to select
“Auto program”.
1
First, select the correct
signal source (Air, STD,
HRC, IRC). See steps
1~2 on previous page.
Press the MENU
button.
Press the DOWN
button to select
“Channel”, then press
the ENTER
button.
4
After all the available channels are stored, the Auto
program menu reappears. Press the MENU button to exit.
Ex) Press -> -> to select cable channel 108.
To select channels over 100,
venus-04-en 6/3/03 3:07 PM Page 24