Samsung HCP4252WX-XAC - Manual (Page 58)

S
P E C I A L
F
E AT U R E S
58
Selecting the HDMI Standard
This feature is for aligning the screen image center dislocated by the differences of various
HDMI or DVI signal sources.
Initial setting is “861B”. If you experience not aligned screen image center when the
“HDMI/DVI IN” jack on the rear of your TV is used for external device, switch the setting to
“SMPTE”.
This feature only works when the external source is set to “HDMI”. Refer to the “Viewing an
External Signal Source” on the page 39 for further details.
2
Press the … or † button to
select “HDMI Standard”, then
press the ENTER button.
Press the … or † button to
select “861B” or “SMPTE”, then
press the ENTER button.
Press the EXIT button to exit.
… More
Melody : On √ √
HDMI Standard : On √ √
V-Chip √ √
Move Enter Return
Setup T V
861B
SMPTE
1
Press the MENU button.
Press the … or † button to
select “Setup”, then press the
ENTER button. Time √ √
Plug & Play √ √
Language : English √ √
Self Focus √ √
Blue Screen : On √ √
Caption √ √
† More
Move Enter Return
Setup T V
BP68-00289A-00Eng 3/30/04 9:28 AM Page 58