Samsung HCP4252WX-XAC - Manual (Page 49)

49
S
P E C I A L
F
E AT U R E S
Changing the Channel of the Sub picture
After you set the signal source (antenna or cable) of sub picture, it is easy to change channels.
8
Press the … or † button to
select “Channel”, then press the
ENTER button.
Press the … or † button to
select a channel you want, then
press the ENTER button.
Press the EXIT button to exit.
PIP : On √ √
Source : TV √ √
Swap √ √
Size : √ √
Position : √ √
Air/CATV : Air √ √
Channel : Air 6 √ √
Move Enter Return
PIP T V
œ The channels of sub picture
are not available when antenna is
set to “ANT 2 IN”.
It links to “ANT 1 IN”.
Air 6
Alternate method:
Press the CH
or CH button to
change channels of sub picture
during PIP on.
Press the STILL button to freeze a
moving picture.
(Normal sound will still be heard.)
Press again to cancel.
Freezing the Picture
œ The still function doesn’t
operate in “Component 1, 2, 3”
mode.
BP68-00289A-00Eng 3/30/04 9:28 AM Page 49