Washing a load of laundry, My cycle – Samsung WF501ANW-XAA User Manual

Page 24

24_

washing a load of laundry

My cycle

Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one–button
convenience.

By pushing the My Cycle button, you activate the settings used during the My Cycle mode.
The “My Cycle” light goes on, indicating activation.

You can select all options as follows in “My Cycle” mode.

1. Select the cycle using the Cycle Selector dial.

2. After cycle selection, set each option.

See page 38 for available option settings with each cycle.

3. Start “My Cycle” by pushing the Start/Pause button in “My Cycle” mode.

The washer will display the cycle and options you selected the next time you choose “My
Cycle”.

You can change the “My Cycle” settings by repeating the same process above.
The washer displays the last settings used the next time you choose “My Cycle”.

To program “My Cycle” settings into your washer, the washer needs to complete an entire
wash cycle. If for any reason the wash cycle is interrupted and the washer does not finish
the cycle, it will not program in the settings for later use.

WF501ANW-03010B-03_EN.indd Sec5:24

2012-05-04

7:13:42

2012-05-04

7:13:42