Samsung BD-P1600-XAA - Manual (Page 25)

English _2
●
COnnECTiOnS
COnnECTing TO a TV (ViDEO) - gOOD QUaLiTY
Using video/audio cables, connect the ViDEO (yellow) / aUDiO (red and white) OUT terminals on the rear of
the Blu-ray Disc Player to the ViDEO (yellow) / aUDiO (red and white) in terminals of your TV.
Turn on the Blu-ray Disc Player and TV.
Press the input selector on your TV remote control until the Video signal from the Blu-ray Disc Player appears
on the TV screen.
If you have set the remote control to operate your TV (see pages 19~20), press the TV SOUrCE button on
the remote control and select VIDEO as the external source of the TV.
Noise may be generated if the audio cable is placed too close to the power cable.
If you want to connect to an Amplifi er, please refer to the Amplifi er connection pages. (See pages 26~28)
The number and position of terminals may vary depending on your TV set. Please refer to the user's manual
of your TV.
If there is only one audio input terminal on the TV, connect it to the [AUDIO OUT][left] (white) terminal of the
Blu-ray Disc Player.
The VIDEO source is always output in 480i resolution regardless of the resolution set in the SETUP menu.
(See page 42)
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright
protection systems and the picture will be distorted on the television.
1.
2.
3.
•
M 




J 
White Red Yellow
Audio/Video cable
01783H-BD-P1590,1590C,1600-XAA-E25 25 2009-07-15 오전 10:26:12