Samsung RS2777SL-XAA - Manual (Page 25)

25
INST
ALLA
TION INSTRUCTIONS
ADJUST THE CLEARANCE BETWEEN THE DOORS
Making small adjustments between doors.
If the door of the freezer is lower than that of the
refrigerator. If the door of freezer is higher than that of the
refrigerator.
3) After adjusting the doors, the nut ( ①) turn clockwise ( ) until it reaches the lower end of the bolt, then
tighten the bolt again with the wrench ( ➂) to fix the nut(①).
If you do not fix the nut ( ①)firmly, the bolt (➁) may be released.
2) Please adjust the height difference between the doors by turning the bolt ( ➁) clockwise ( ) or counter
clockwise ( ).
When you turn clockwise ( ), the door goes up.
➂ WRENCH
Adjustment part
➀ NUT
➁ BOLT
Adjustment part
➂ WRENCH
➀ NUT
➁ BOLT
➀ NUT
➁ BOLT
➂ WRENCH
➂ WRENCH ➂ WRENCH
➁ BOLT ➁ BOLT
Please open the doors and adjust then as follows:
1) Release the nut ( ①) on the lower hinge until it reaches the upper end of the bolt (➁).
➁ BOLT
➂ WRENCH
➀ NUT
NOTE
NOTE
About Leveling first.
NOTE
NOTE
When you release the nut(
①), use enclosed hex wrench (➂) to turn the bolt(➁) in a slightly
counterclockwise direction. This will enable you to turn the nut(
①) loose with your fingers.
DA68-00500W(1.3) 2007.7.25 11:41 AM 페이지25 in