Samsung RF31FMEDBWW-AA - Manual (Page 13)

( 8 )
Sparkling
Water
( Hold 3
sec for
Carbonation
Level
Change )
The Sparkling Water button serves two purposes:
- To select the Sparkling water you want dispensed.
- Selecting the Carbonation Level of Sparkling Water when producing sparkling water
1) To Select the Sparkling Water
To dispense soda beverage, press the Sparkling Water Button.
When the Sparkling Water is selected, the Sparkling Icon will turn on.
When it is in the middle of producing sparkling water, the Sparkling Icon keeps blinking.
When it is in the middle of producing sparking water, it does not dispense the sparkling
water. So, please wait until it fi nishes producing sparkling water.
2) Changing the Carbonation Level of Sparkling Water
When pressing the Sparkling Water Button for 3 seconds, its level will be changed.
Each time the button is pressed for 3 seconds, the Carbonation Level will be looped
in the order of Medium (Level-2) → Strong (Level-3) → Weak (Level-1) → Medium
(Level-2).
The new Carbonation Level will be applied from the next production.
- When there is previously produced sparkling water inside, it dispenses sparkling
water with the previous Carbonation Level. (Even if the Carbonation Level is
changed, it does not affect until the next production.)
- When the Carbonation Level is changed during the production of sparkling water
(The Sparkling Icon is blinking), it produces sparkling water according to its previous
Carbonation Level.
( 9 )
Ice Off If you don’t want to make more ice, touch the Ice Off button.
The icon will light up and the Ice-Maker stops making ice.
We recommend you to stop ice making if the following occur:
- There is enough ice in the ice bucket.
- You want to save water and energy.
- Water is not being supplied to the refrigerator.
If the ice maker function is ON, and the water Line is not connected, there will
be a water valve noise from the back of the unit. press the Ice Off (Hold 3sec
for child lock) button for less than 3 seconds until the Ice Off Indicator ( )
illuminates.
If you do not press any button(letters not ICON), the display turns off in a few seconds.
If you press any button(letters not ICON) , the display lights up again.
The function key will operate after you remove your finger from the letters except Energy
Saver Key.
( 10 )
Filter
Water fi lter usage
This icon will light up when you need to change the fi lter. After you use about 300
gallons of water, the fi lter indicator lights up. (about 6 months). After you install the
new water fi lter, reset the fi lter indicator by touch and hold 3sec for Filter Reset button.
- If water is not dispensing or dispensing slowly, you need to replace the
water fi lter because the water fi lter is clogged.
- Some areas have large amounts of lime in their water, which causes the
water fi lter to clog more quickly.