beautypg.com

Network security protocols, Network connection - wired – Samsung UN85S9AFXZA User Manual

Page 19

background image

• To use a wireless network, the TV must be connected to a wireless router

or modem. If the wireless router supports DHCP, the TV can use a DHCP
or static IP address to connect to the wireless network.

• Select a channel that is not currently in use for the wireless router. If the

channel set for the wireless router is currently being used by another
device, the result is usually interference and/or a communications failure.

• Most wireless networks have an optional security system. To enable a

wireless network's security system, you need to create a security key using
characters and numbers, and then enter that key into the router through
its menu. You then must enter this security key into any other devices you
want to connect to the wireless network.

Network Security Protocols

The TV only supports the following wireless network security protocols:

• Authentication Modes: WEP, WPAPSK, WPA2PSK

• Encryption Types: WEP, TKIP, AES

In compliance with the newest Wi-Fi certification specifications, Samsung TVs
do not support WEP or TKIP security encryption in networks running in the
802.11n mode.
If the wireless router supports WPS (Wi-Fi Protected Setup), you can connect
the TV to your network using PBC (Push Button Configuration) or a PIN
(Personal Identification Number). WPS automatically configures the SSID and
WPA key settings.
Your Smart TV cannot connect to uncertified wireless routers.

Network Connection - Wired

There are three main ways to connect your TV to your network using cable,
depending on your network setup. They are illustrated below:

The Modem

Port on the Wall

Modem Cable (Not Supplied)

LAN Cable (Not Supplied)

One Connect

External Modem

(ADSL / VDSL / Cable TV)

The Modem

Port on the Wall

One Connect

Modem Cable
(Not Supplied)

LAN Cable

(Not Supplied)

LAN Cable

(Not Supplied)

External Modem

(ADSL / VDSL / Cable TV)

IP Router that has

a DHCP Server

One Connect

The LAN Port

on the Wall

LAN Cable (Not Supplied)

The TV does not support network speeds less than or equal to 10Mbps.

Use Cat 7 cable for the connection.

English - 18

English - 19

[UN85S9AF-ZA]BN68-05182B-05ENG.indb 19

2013-10-30 �� 10:03:37