Samsung LF19BKBLB-ZA - Manual (Page 40)

A setting of 0 configures the PC-over-IP processor to adjust the bandwidth depending on network
congestion. If there is no congestion, there will be no limit, i.e. up to the maximum network data
rate.
RDP
The RDP tab allows configuration of the Remote Desktop Protocol (RDP) specific device settings.
Resolution
The Resolution field is the RDP screen resolution setting. Possible values are:
• 1024x768
• 1280x1024
• 1600x1200
Bitdepth
The Bitdepth is the RDP session colour bit depth. Possible values are:
• 8 bpp (bits per pixel)
• 16 bpp
• 24 bpp
Terminal Server Port
The Terminal Server Port field sets the port number that the RDP client connects to.
Audio Mode
The Audio Mode field allows you to set the audio status when connecting to the RDP client. Possible
values are:
• None
• Play on client
Using the Software