Samsung HLR5688WX-XAA - Manual (Page 22)

Connecting a Camcorder
You can use your camcorder to view tapes without using a VCR.
1 Locate the A/V output jacks
on the camcorder. They are
usually found on the side or
back of the camcorder.
2 Connect a video cable
between the VIDEO IN (or
S-VIDEO IN) jack on the TV
and the VIDEO OUT jack on
the Camcorder. The audio-
video cables shown here are
usually included with a
Camcorder. (If not, check
your local electronics store.)
If your Camcorder is stereo,
you need to connect a set of
two cables.
3 Connect a set of audio
cables between the AUDIO
IN jacks on the TV and the
AUDIO OUT jacks on the
camcorder. If you have a
mono Camcorder, connect
L(mono) to the Camcorder
audio out using only one
audio cable.
Connections
English - 22
Camcorder
Output Jacks
TV Rear Panel
Camcorder
1
2
3
or
BP68-00489A-00(018~029) 4/22/05 3:49 PM Page 22