Samsung HG28NC677AFXZA - Manual (Page 5)

5
English
Installing the LED TV Stand
The 40” and larger LED TVs have swivel stands. You can configure these stands so that the TVs swivel 20 degrees left and
right, 60 degrees left and right, or 90 degrees left and right. See page 6.
Components
When installing the stand, use the provided components and parts.
A
1 EA
or
28" 40" 48"
B
1 EA or
C
x7 (M4 X L12)
x8 (M4 X L12, for 40"
and above models)
D
y Stand (differs depending on the model) y Guide Stand y Screws
y Security Screws (3EA)
(4EA, for 40" and above
models)
✎
NOTE
y Make sure to distinguish between the front and back of the Stand and Stand Guide when connecting them.
y Make sure that at least two people lift and move the LED TV.
y The number of screws may differ depending on the model.
(Stand differ depending on the model)
1 2
3
A
B
C x4
(M4 X L12)
Side
Front
DO NOT USE
CHEMICALS
DO NOT USE
GREASE
DO NOT USE
OIL
ATTENTION
✎ Place a soft cloth over a table to protect the TV, and
then place the TV on the cloth screen side down.
✎ Insert the Stand Guide into the slot on the bot-
tom of the TV. (Stand differ depending on the
model)
Top View
C C x3 x4
(M4 X L12) (M4 X L12, for 40"
and above models)
or
40"48"model have
D D x3
x4
(Security
Screw) (Security Screw,
for 40" and
above models)
or
[HC670_677_678-ZA]Install Guide-X0ENG.indd 5 2014-03-17 10:02:19