Samsung HG28NC677AFXZA - Manual (Page 22)

22
English
Menu Item initial Value Description
Security
Password Input Input Password 00000000.(HC678 model none)
Password Setting … Set new Password.(HC678 model none)
Password Reset … Reset Password to 00000000.(HC678 model none)
Security Mode … Security Mode ON or OFF.(HC678 model none)
USB … USB Disable or Enable.(HC678 model none)
HDMI … HDMI Disable or Enable.(HC678 model none)
DRM
DRM Mode Pro:idiom
Configures CAS support. Applies to only the NB673, NB677, and NB678
models.
OFF : Turns off CAS support.
LYNK DRM : Select to turn on S-LYNK DRM CAS support only.
Pro:idiom : Select to turn on Pro:Idim CAS support only.
LYNK DRM,PI : Select to have the TV support S-LYNK DRM CAS and
Pro:Idiom CAS.
PI AES Data 0xD279 Displays the current state of Pro:Idion AES
PI AES Log OFF
PI AES Log consists of Pro:Idiom AES diagnostic register, here after referred
as AESD, values. These register log will help us diagnose PI key loss issue in
the field and provide solution for it.
View PI AES Log … Displays Pro:Idion AES Log OSD
System
Self Diagnosis
for TV
Lets you check the state of the TV picture and sound.
• Picture Test : Use to check for picture problems. If the problem appears in
the test picture, select YES, and then follow the directions on the screen.
• Sound Test : Use to check for sound problems. If the problem occurs
during the test, select YES, and then follow the directions on the screen.
Self Diagnosis
for HTV
Lets you check the state of Pro:Idiom and its communication with the
SI STB or SBB. If you have any problems with the Pro:idiom encryption
channel or the communications with the SI STB or SBB, use this diagnosis
function. If Pro:Idiom DTV Channel Key Loss appears to have failed and
the Pro:Idim encryption channel has failed to play content, first check the
broadcasting systems related to Pro:Idiom encryption. If your broadcasting
system does not have a problem, contact Samsung Service. If STB SI
Vendor Setting appears to have failed and communication with the SI STB
or SBB has failed, first check your SI STB or SBB. If your SI STB or SBB
does not have a problem, contact to Samsung Service.
SW Upgrade Lets you upgrade the TV SW with a USB memory stick. See Page 32.
Service Pattern OFF
Lets you check the state of the TV picture by displaying picture test
patterns. Press the Menu button to turn off the test patterns and exit.
ATV Cable AGC
Gain
Default
Lets you control the AGC gain of the analog cable channels. Don't change
the default value unless problems occur.
DTV OpenCable
AGC Gain
Default
Lets you control the AGC gain of the digital cable channels. Don't change
the default value unless problems occur.
Sound Bar Out OFF
ON: TV speaker sound will be mute. Sound will come out through HDMI.
You must connect the Sound Bar to hear the sound.
OFF: Sound will come out through TV speakers normally.
Contact Samsung Samsung Contact information
TV reset Returns all settings on the TV to their factory defaults.
✎
REACH (Remote Enhanced Active Control for Hospitality) is a professional, interactive remote controller that lets you
deliver TV firmware updates, cloning data, channel mapping changes, S-LYNK REACH contents, and TICKER contents
through RF DTV to several hundred hospitality TVs simultaneously. The REACH functions are available only in stand-
alone mode. The REACH Server is sold separately. Refer to the REACH server manual enclosed with the REACH server
product for more operating information.
[HC670_677_678-ZA]Install Guide-X0ENG.indd 22 2014-03-17 10:02:27