AutoPage RS-727LCD User Manual

Page 14

2. Within 5 seconds, enter your chosen first digit code by pressing and releasing the

Valet Switch. (When finished above procedures, system's siren will stop alarming,
lights will stop flashing, but the vehicle can’t be started.)

3. Within 15 seconds of the last digit code enter (the 1st code), then turn the Ignition

Switch “OFF” and then “ON”.

4. Within 15 seconds, enter your chosen second digit code by pressing and releasing

the Valet Switch.

5. Turn the ignition switch “OFF” position. 4 Chirps from siren/horn and 3 flashes from

the parking lights will indicate the system has disarmed.

Note 1: You must override the alarm within 60 seconds. If not, the system will
automatically re-arm.
EXAMPLE: To Override The System With The Password Code 83,
1. Enter the vehicle and turn the ignition switch to the 'ON’ position.
(Alarm will sound.)
2. Within 5 seconds, Press and Release the Valet Switch 8 times, (When finished the
system's siren will stop alarming, lights stop flashing, but the vehicle can not be started or
driven away.)
3. Within 15 seconds of entering the last digit code enter (the 1

code), turn the Ignition

Switch “Off” and then “ON”.
4. Within 15 seconds, Press and Release the Valet Switch 3 times.

Turn the Ignition Switch to the “Off” position. 4 Chirps form siren/horn and 3 flashes

from the parking lights will indicate the system has disarmed.

K. VALET MODE:

(System in Disarm or Valet mode)

The valet switch allows you to temporarily bypass all alarm function, eliminating the need
to hand your transmitter to parking attendants or garage mechanics. When the system is
in valet mode, all alarm functions and remote start functions are bypassed, however, the
remote panic feature and remote door locks will remain operational. To use the valet
mode, the system must first be disarmed either by using your remote transmitter, or by
operating the Manual Override sequence.

Enter Valet Mode:

1. From the disarmed condition, turn the

ignition to the “ON” position.

2. Push and hold the valet switch for 2

seconds until the LED turns on. The
LED will remain “on” as long as the
system is in 'valet mode'.

Remote Door Lock

Remote Door Unlock

Exit Valet Mode:

1. Return to normal operation, turn ignition 'on'.

Push and hold the valet switch for 2 seconds, The LED will turn off, indicating the
system has exited the valet mode.

L. CAR LOCATOR

Under the armed mode, press the

button to

activate the car locator function. The siren will chirp
6 times. The parking lights will flash 12 times
making it easier to locate your car.

M. PANIC FUNCTION: