Samsung DVD-R120-XAA - Manual (Page 15)

English - 15
Step 1: Unpacking
Method 1 : Antenna + DVD Recorder
+ TV : No Cable box
You can record non-scrambled channels by selecting the
channel on the DVD Recorder. Also use this Method if
you watch channels without cable box.
Method 2 : Antenna + Cable box +
DVD Recorder + TV : Cable box
with many scrambled channels
You can record channels by selecting the channel on the
cable box. You cannot record one channel while
watching another channel. Be sure that the cable box is
turned on.
Accessories
Check for the supplied accessories below.
● Video/Audio Cable (AC39-00073A)
● RF Cable for TV (AC39-42001J)
● Remote Control (AK59-00012H)
● Batteries for Remote Control (AAA Size)
(AC43-12002H)
● EP-2 Plug Converter (3721-000117)
● User’s Manual (AK68-00773A)
● Quick Guide (AK68-00684A)
There are several ways to connect your DVD Recorder.
Select one of the following antenna connections that
best suits you below.
● Method 1 : Antenna + DVD Recorder + TV : No Cable
box
● Method 2 : Antenna +Cable box + DVD Recorder +
TV : Cable box with many scrambled channels
● Method 3 : Antenna + DVD Recorder + Cable box
+TV : Cable box with a few scrambled channels
Step 2: Connecting the Antenna
Cable
■ If you are using an off-air antenna that has
300-ohm twin flat leads, use an external
antenna connector (300-75 ohm adaptor :
not supplied) to connect the antenna to
the DVD Recorder.
■ If you have two separate antennas (one
VHF and the other UHF), use a UHF/VHF
combiner-adaptor (available at most
electronics shops) to connect the antenna
to the DVD Recorder.
■ The VHF/UHF RF OUT jack of this
product sends only signals received
through the antenna. It does not output
Audio/ video signals. You must connect
audio/video cables to view Video from the
unit. (i.e. DVD playback)
NOTE
C
onnecting & Setting UP
2_00773A-R120-AFS(14~29) 3/22/05 7:31 PM Page 15