Alpine CDA-7863 - Manual (Page 8)

6
-EN
Displaying Time
1
Press the CLK (clock) button repeatedly until the
time is displayed.
Each press changes the modes as follows:
Radio mode
CD Player/Changer modes
NOTE
Selecting any tuner or CD function while in the clock
priority mode will interrupt the time display
momentarily. The function selected will be displayed for
about 5 seconds before the time returns to the display.
Setting Time
1
Press and hold the CLK (Clock) button for at
least 3 seconds while the time is displayed until
the time indication blinks.
2
Rotate the MODE (Audio Control) knob to adjust
the hours while the time indication is blinking.
3
When the hours has been adjusted, press the
MODE (Audio Control) knob.
4
Rotate the MODE (Audio Control) knob to adjust
the minutes while the time indication is blinking.
The time is automatically set 5 seconds after the
minute adjustment. The time can also be
manually set by pressing the MODE (Audio
Control) knob.
MODE INTLZ CLK
TUNE DN g f UP
→ →
Radio frequency
DISC TEXT
mode Playing time
mode → → → Clock priority
mode
Basic Operation
Clock priority
mode →
TITLE mode
TRACK
TEXT mode
←
TITLE mode
←
Dimmer Control
Set the DIMMER control to AUTO to decrease the
illumination brightness of the unit with the head
lights of the vehicle ON. This mode is useful if you
feel the unit's backlighting is too bright at night.
1
Press and hold the INTLZ button for more than 2
seconds.
2
Press the f UP button repeatedly to select
"DIM".
Each press of the f UP button scrolls the
modes as shown:
NOTE
If you press the DN g button the display scrolls in
reverse sequence.
3
Press the TUNE button to select the Dimmer mode.
Each press toggles between DIM AUTO and DIM
MANU.
4
Press and hold the INTLZ button for more than 2
seconds to activate the normal mode.
→ DIM → SUBW → BEEP → MUTE
DEMO
← AUX ← SCR ←