Samsung Sensory Pleasure NV3 - Manual (Page 75)

《74》
Important notes
■ Do not attempt to disassemble or modify the camera.
■ Under certain conditions, static electricity can cause the flash unit to fire.
This is not harmful to the camera and is not a malfunction.
■ When images are uploaded or downloaded (when the charger and USB cable
are inserted into the cradle at the same time), the data transfer may be affected
by static electricity. In this case, disconnect and re-connect the USB cable before
trying the transfer again.
■ Before an important event or going on a trip, you should check the camera
condition.
- Take a picture to test the camera and always carry a spare fully charged battery.
- Samsung cannot be held responsible for camera malfunctions.
■ Do not use headphones/earphones while driving, cycling, or operating any
motorized vehicle. It may create a traffic hazard and can be illegal in some areas.
■ Avoid using headphones/earphones at high volume. Hearing experts advise
against continuously loud and extended play. If you experience a ringing in your
ears, reduce volume or discontinue use.
Warning indicator
■ There are several warnings that may appear on the LCD display
Card Error!
ㆍMemory card error
→ Turn off the camera power and turn it on again
→ Insert the memory card again
→ Insert the memory card and format the memory card (p.59)
Card Locked!
ㆍThe memory card is locked
→ SD memory card : Slide the write protect switch towards the top of the
memory card
No Card!
ㆍA memory card is not inserted
→ Turn off the camera power
→ Insert the memory card
→ Turn on the camera power
No Image!
ㆍThere are no images stored on the memory
→ Take images
→ Insert a memory card that is holding some images
File Error!
ㆍFile error
→ Delete the file
ㆍMemory card error
→ Contact a camera service centre
Low Battery!
ㆍThere is low battery capacity
→ Insert charged battery
Low Light!
ㆍWhen taking pictures in dark places
→ Take pictures in Flash Photography mode.
Out Of Number
ㆍ When selecting too many printing pages in the PictBridge menu.
→ Select printing page within the limitation.