Configuring detailed settings on the picture – Samsung LE32M87BD User Manual
Page 19
english - 1
You can set detailed picture settings.
1. Press the menu button to display the menu.
2. Press the enter/oK button, to select "Picture".
. Press the ▲ or ▼ button to select "Detailed Settings", then
press the
enter/oK button.
. Select the required option by pressing the ▲ or ▼ button,
then press the
enter/oK button.
Available options: Black Adjust, Dynamic Contrast, Gamma,
White Balance, My Colour Control, Edge Enhancement,
Colour Space
. When you are satisfied with your setting, press the
enter/oK button.
. Press the exIt button to exit.
When the picture mode is set to Movie or Standard, Detailed
Settings can be selected.
If DNIe is Off, the Detailed Settings cannot be selected when
the Picture mode is in Standard mode.
black adjust: off/low/medium/high
You can directly select the black level on the screen to adjust the screen depth.
Dynamic Contrast: off/low/medium/high
You can adjust the screen contrast so that the optimal contrast is provided.
gamma: - ~ +
You can adjust the middle brightness of pictures.
Press the ◄ or ► button until you reach the optimal setting.
White balance: r offset/g offset/b offset/r gain/g gain/b gain/reset
You can adjust the colour temperature for more natural picture colours.
R Offset/G Offset/B Offset/R Gain/G Gain/B Gain: Changing the adjustment value will refresh the
adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the
enter/oK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted white balance will be reset to the factory defaults.
my Colour Control: Pink/green/blue/White/reset
This setting can be adjusted to suit your personal preferences.
Pink/Green/Blue/White: Changing the adjustment value will refresh the adjusted screen.
Select the required option by pressing the ▲ or ▼ button, then press the
enter/oK button.
Press the ◄ or ► button until you reach the optimal setting.
Reset: The previously adjusted colours will be reset to the factory defaults.
edge enhancement: off/on
You can emphasize object boundaries.
Colour Space: auto/Wide
You can set the colour reproduction space for the input signal to Auto or Wide.
Configuring Detailed Settings on the Picture
Picture
mode
: movie
Contrast
0
brightness
Sharpness
10
Colour
tint g0
r0
Colour tone
: Warm2
Detailed Settings
backlight
: 0
more
tV
move
enter
return
Detailed Settings
black adjust
: off
Dynamic Contrast : off
gamma
: 0
White balance
my Colour Control
edge enhancement : off
Colour Space
: auto
move
enter
return
tV
BN68-01186K-Eng-0523.indd 17
2007-05-23 ¿ААь 11:13:55