Setting up your side-by-side refrigerator, Getting ready to install the refrigerator, Selecting the best location for the refrigerator – Samsung RSG5PURS User Manual
Page 11: When moving your refrigerator
setting up _11
01 SETTING
UP
GETTING READY TO INSTALL
THE REFRIGERATOR
Congratulations on the purchase of your Samsung
Side-By-Side Refrigerator. We hope you will enjoy
the many state-of-the-art features and effi ciencies
that this new appliance has to offer.
Selecting the best location for the
refrigerator
• Select a location with easy access to the water
supply.
• Select a location without direct exposure to
sunlight.
• Select a location with level (or nearly level) fl ooring.
• Select a location with enough space for the
refrigerator doors to open easily.
• Allow suffi cient space to the right, left, back and
top for air circulation.
- If your refrigerator is not level, the internal cooling
system may not work correctly.
- Refer to drawing and dimensions below for overall
space required for use.
• Please ensure that appliance can be moved freely
in the event of maintenance & service.
When moving your refrigerator
To prevent fl oor damage be sure the front levelling
legs are in the up position (above the fl oor). Refer to
‘Levelling the refrigerator’ in the manual(at page 15).
To protect the fi nish of the fl ooring, place the
protection sheet such as packing carton under the
refrigerator.
When installing, servicing or cleaning behind
the refrigerator, be sure to pull the unit straight
out and push back in straight after fi nishing.
First things fi rst! Make sure that you can easily move
your refrigerator to its fi nal location by measuring
doorways (both width and height), thresholds,
ceilings, stairways, etc. The following chart details
the exact height and depth.
Model
RSG5*
RSG5*CRS
Dimension
(mm)
Width
Without Door
908
908
With Door
912
912
Depth
Only Cabinet
600
600
Without Handle
687
687
With Handle
737
742
Height
Without Door
1745
1745
With Door
1780
1780
• Allow clearance to the right, left, back and top
when installing. This will help reduce power
consumption and keep your energy bills lower.
• Do not install the refrigerator where the temperature can
drop below 10°C.
• Make sure you disconnect the water supply line
BEFORE removing the freezer door. See the next
section on “Separating the Water Line” to avoid
damage.
Setting up your side-by-side
refrigerator
at least 6mm
at least 6mm
at least 6mm
at least 6mm
CAUTION
Leg
Leg
Screw Driver
Screw Driver