Ampeg HERITAGE SVT-410HLF - Manual (Page 9)

POWER HANDLING:
800W RMS (MONO)
400W RMS (DUAL)
IMPEDANCE:
4 OHMS (MONO)
8 OHMS (DUAL)
PIN 1+ = POS (+)
PIN 1- = NEG (-)
4X10-DUAL MODE ONLY
4X10-DUAL MODE
MONO INPUTS
-or-
Heritage Bass Guitar Cabinets
SVT-410HLF / SVT-810E
9
SVT-810E Jackplate
1: 1/4” Upper 4x10 Dual Mode Input Jack
2: 1/4” Lower 4x10 Dual Mode or Mono Mode Input / Output Jacks
3: Speakon
® Lower 4x10 Dual Mode or Mono Mode Input / Output Jacks
3
2
1
The cabinet operates in Dual Mode whenever a connector is inserted into the
1/4” Upper 4x10 Dual Mode input jack [1]. Otherwise, the cabinet operates in
the single 8x10 Mono Mode.
Speakon ® to 1/4” Wiring Diagram:
1+
1-
1+ 1-