Ampeg HERITAGE SVT-410HLF - Manual (Page 11)

Heritage Bass Guitar Cabinets
SVT-410HLF / SVT-810E
11
Service Information
If you are having a problem with your Heritage SVT-810E cabinet, you can go to our website
(www.ampeg.com) and click on Support for service information, or call Technical Support at
1-800-898-3211 Monday-Friday during normal business hours, PST, to receive assistance. If
you are outside of the U.S., contact your local distributor for technical support and service.
Heritage SVT-810E TECHNICAL SPECIFICATIONS
Type 8x10 / Dual 4x10 Bass Enclosure
Frequency Response (+/–3 dB) 58 Hz – 5 kHz
Usable Low Frequency (–10 dB) 40 Hz
RMS Power Handling Combined / Mono Mode: 800 watts 8x10
Split / Dual Mode: 400 watts each 4x10
Peak Power Handling Combined / Mono Mode: 1600 watts 8x10
Split / Dual Mode: 800 watts each 4x10
Impedance Combined / Mono Mode: 4 ohms 8x10
Split: 8 ohms each 4x10
Sensitivity Combined / Mono Mode: 100 dB SPL 1w/1m
Maximum SPL 130 dB
Components 8 Custom Designed Eminence 100 watt 10” speakers
Size (H x W x D) 48.0 in/1219 mm (with feet) x 26.0 in/660 mm
x 16.0 in/406 mm
Weight 137 lb/62.14 kg (approximately)
Speakon ® is a registered TM of Neutrik AG
Eminence ® is a registered TM
The Heritage SVT-810E is covered with a durable fabric-backed vinyl material. Clean with a dry
lint-free cloth. Never spray cleaning agents on the Heritage SVT-810E. Avoid abrasive cleansers which
would damage the finish.
Ampeg continually develops new products and improves upon existing ones. For this reason, the specifications
and information in this manual are subject to change without notice.
“Ampeg” is a registered trademark of LOUD Technologies Inc. All other brand names mentioned are trademarks
or registered trademarks of their respective holders and are hereby acknowledged.
www.ampeg.com
©2009 LOUD Technologies Inc.
16220 Wood-Red Road NE • Woodinville, WA 98072
Part No. SW0820 Rev. A 12/09