Samsung LE40R88BD - Manual (Page 18)

english - 1
Changing the Colour tone
You can select the most comfortable colour tone to your
eyes.
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 15)
2. Press the 5 or 6 button to select "Colour Tone", then press
the enter/oK button.
. Press the 5 or 6 button to select the desired colour tone
setting. Press the enter/oKbutton.
. Press the exIt button to exit
 Cool2: Makes the colour temperature bluer than "Cool1"
menu.
 Cool1: Makes whites bluish.
 normal: Keeps whites white.
 Warm1: Makes whites reddish.
 Warm2: Makes the colour temperature redder than
"Warm1" menu.
The adjusted values are stored according to the selected Picture mode.
When the picture mode is set to Dynamic or Standard, Warm1 and Warm2 cannot be selected.
Picture
mode : Dynamic 
Contrast 100
brightness 0
Sharpness
Colour
tint g0 r0
Colour tone : Cool1 
Detailed Settings 
backlight : 10 
 more
tV
move enter return
Picture
mode : Dynamic
Contrast 100
brightness 0
Sharpness
Colour
tint g0 r0
Colour tone : Cool1
Detailed Settings
backlight : 10
 more
tV
move enter return
Cool 2
Cool 1
normal
Warm 1
Warm 2
You can adjust the screen brightness by adjusting the lCD
backlight brightness. (0~10)
activating backlight
1. To select the desired picture effect, follow the
"Changing the Picture Standard" instructions number 1 to 3.
(On page 15)
2. Press the ▲ or ▼ button to select “Backlight”, then press the
enter/oK button.
. Press the ◄ or ► button to decrease or increase the value of
a particular item.
. Press the enter/oK button.
Press the exIt button to exit.
Picture
mode : Dynamic 
Contrast 100
brightness 0
Sharpness
Colour
tint g0 r0
Colour tone : Cool1 
Detailed Settings 
backlight : 10 
 more
tV
move enter return
10 backlight
adjust return
BN68-01169C-Eng-0313.indd 16 2007-03-13 �� 9:13:41